Structural Drafter

Structural Drafter
Interest Category : Engineering
Interest Sub Category : Engineering - CADD
Employment Category/Status : Full Time
Type of Position : Temporary
Country : U.S.
State/Province : California
City : Los Angeles

Minimum Requirements : An Associate's Degree and a minimum of 5 years of experience with Microstation drafting software. Experience in structural and civil drafting. Experience with drafting tanks and reservoirs.

Job Description : Functioning as a team member of assigned construction projects.

The successful candidate will:
- Work closely with design engineers to prepare drawings with Microstation software.
- Draft drawings in full compliance with company standards with regards to layering and coloring system.EOE M/F/D/V

Apply now

Gas Drilling Foreman

Gas Drilling Foreman


MINIMUM REQUIREMENTS:
Education: High School Diploma or BS Petroleum Engineering, Mechanical Engineering or Electrical Engineering. Current certificate in BOP and Well Control. Experience: 7 years with a BS degree. 13 years without a BS. Candidate should have skill and expertise in deviated drilling including short radius horizontal wells and offshore jackup drilling experience and should have in depth knowledge of top drive units, MWD technology and oil base muds. Must have experience in drilling high pressure/high temperature wells as deep as 17,000 feet with heavy mud weights as high as 165 PCF in high H2S concentrations of 20%.

DUTIES/RESPONSIBILITIES:
The Liaisonman shall serve as the primary liaison between Saudi Aramco and Contractor and will provide supervision of all Operations performed on Saudi Aramco Wells. Will provide training and evaluation of Saudi Aramco Saudi Arab Liaisonmen/Toolpusher trainees. Will make recommendations on alternative methods of equipment when unusual situations are encountered and will coordinate timely deliveries of Saudi Aramco and Service Company materials and equipment to the Well as required. The Liaisonman will ensure that the Contractor meets all requirements of the contract and will verify and approve all the Contractor and Service Company Operations by way of tour reports and field tickets.

Apply now

Gas Drilling Engineer

Gas Drilling Engineer

MINIMUM REQUIREMENTS: Education: BS in Petroleum Engineering Experience: Fifteen (15) years experience in drilling engineering and the design of vertical horizontal and multilateral oil and gas wells. Knowledge and experience in the application of new drilling technology and under-balanced drilling are desirable.

DUTIES/RESPONSIBILITIES: Writes drilling and workover programs for oil development, gas and water wells. Writes well completion reports. Monitors daily drilling operations and provides technical and engineering support to drilling operations. Evaluates new drilling equipment and procedures to reduce cost and increase drilling efficiency. Initiates studies to solve drilling problems and recommends ideas to enhance drilling performance.

Apply now

Drilling Superintendent

Drilling Superintendent
MINIMUM REQUIREMENTS:
Education: BS Petroleum Engineering. Current certificate in BOP and well control. Should have valid well control certificate issued by IADC/IWCF or schools accredited either to IADC/IWCF. Experience: Excellent management skills and technical knowledge in drilling operations. Should be aware of latest technologies used in oil drilling and workover operations. Must have strong petroleum engineering background. Must have supervised more than 3 to 4 rigs at a time. Solid background in supervision high temperature/high pressure wells with high H2S concentration, Experience in supervising offshore jackup rigs will be an added advantage.

DUTIES/RESPONSIBILITIES:
Perform managerial duties at the division level including preparation of Div. budgets and quarterly accountability statement. Resolves difficult and unusual problems which could otherwise delay drilling progress, makes decisions under emergency operating conditions to solve problems and protect crew, rig and well. Holds meetings to coordinate activities and makes frequent inspections to assure operations conforms to plans and are being carried out safely, efficiently and economically. Receives technical advise from and cooperates and coordinates with drilling engineering, reviews and approves well programs. Directs preparation of the reviews/approves forecasts for manpower, materials and supplies required to prate assigned rigs, order tools, supplies and supporting service and initiates action to assure stocks are maintained at minimum adequate levels.

Apply now

Drilling Supervisor

Drilling Supervisor
MINIMUM REQUIREMENTS:

Education: High School or BS Petroleum Engineering, Mechanical Engineering, or Electrical Engineering. Current certificate in BOP and Well Control. Experience: Skill and expertise in oil and gas in deviated drilling including short radius horizontal wells. Should preferably have offshore jack up drilling experience and should have in-depth knowledge of top drive units, MWD technology, DST equipment, well testing and stimulation, drilling exploratory wells, open and cased hole completions, basic fishing operations, running long string of casing, cementing with multistage tools, running and cementing big size casing, and oil based moods (mud). Must have proven job knowledge to handle operational responsibilities on critical, high temperature/high pressure wells as deep as 17,000 feet with heavy mud weights as high as 165 PCF in high H2S concentrations of 20%. Must have basic computer skills.

DUTIES/RESPONSIBILITIES:

Will serve as the primary liaison between Saudi Aramco and Contractor and will provide supervision of all operations performed on Saudi Aramco Wells. Provide training and evaluation of Saudi Aramco Saudi Arab Liaisonmen/Toolpusher trainees. Make recommendations on alternative methods of equipment when unusual situations are encountered and will coordinate timely deliveries of Saudi Aramco and Service Company materials and equipment to the well as required. Ensure that the contractor meets all requirements of the contract and will verify and approve all the contractor and service company operations by way of tour reports and field tickets. Will ensure that the contractor maintains the rig and equipment adequately to maximize efficiency and minimize down time, and that Saudi Aramco materials and equipment are properly utilized, handled and stored.

Apply now

Senior Mechanical Drilling Systems Engineer

The primary function of this position is to conduct engineering activities in support of basic and detail engineering design of mechanical, marine and drilling equipment and systems on all mobile offshore drilling units; such as jack-up drilling rigs, semi-submersibles or on vessels such as drill ships, pipe-lay vessels or crane vessels.

Responsibilities include, but not limited to, the following:
# Oversee development, review and approval Gas, layouts and P&IDs for all
systems on mobile offshore drilling units or vessels.
# Review 3D model with the designers to verify the GA’s, layouts and P&IDs.
# Responsible for selection of methods and procedures and optimization of the
design and materials within the scope of the project specifications.
# Close cooperation and coordination with other department disciplines to
ensure that the design engineering is properly translated to the drawings and
specification.
# Coordinate effort and priorities with the Engineering Project Manager so that
the engineering output coincides with the overall project schedule.
# Coordinate manpower requirements with the department manager.
# The Engineer may be assigned as the Package Engineer for the equipment
or components of the marine and drilling systems. In this function he or she
will have technical responsibility for the design, procurement and
manufacture of these equipment and components, which may include
preparation of technical specifications, technical evaluation of
RFQ/equipment specifications and attending FAT, if required.
# The Engineer must be capable of working independently with direction from
their department supervisor.
# All tasks and duties as assignment by SBM Offshore Group Management.
Education and Experience:
# Bachelors Degree in Marine, Mechanical, Naval Architecture or Ocean
Engineering. An advanced Engineering degree or professional registration is
desirable.
# Experience with supervising a project team of engineers and designers
# Minimum 10 years engineering experience within the oil and gas industry
with 3-4 years experience with semi-submersibles, jack up and barge drilling
rigs, drill ships or other offshore facilities.
# Strong knowledge of all Classification Rules, national and international
standards, API standards that apply to the offshore facilities.

All positions offered require excellent written, interpersonal and communication skills. Positions may require overseas travel and/or offshore assignment.

Apply Now

Sr Drilling Engineer Drilling Advisor

Responsible for designing complex drilling procedures,
including straight, directional and horizontal. Must be up to date on all
new industry drilling technologies.

Qualifications:
BS in Engineering (Petroleum or Mechanical)
15+ years experience in the oil and gas industry as a Drilling Engineer.
Expertise in horizontal and geopressured areas is a must. Must be current on
all new.

Apply now

Sr. Drilling Engineer

Job Category: Engineering
Position Title: Drilling Engineer
Salary Range: -
Location: Oklahoma City, Oklahoma, USA
Desired Skills: -
Description: Sr. Drilling Engineer

Requirements:
•Experience in Haynesville shale (recent/current or expert), Haynesville / Bossier Horizontal Shale Operations in East Texas.
•Horizontal drilling
•No less than 7-10 years experience, season professional desired

Apply now

Senior Drilling Engineer

Senior Drilling Engineer
Company Name: Maersk Oil Houston, Inc.
Location: SPRING, TX

ROLE:
Supervise and participate in the provision of deepwater well design, planning, programming and reporting of drilling operations to ensure the technical and safety integrity of wells. Supervision of procedures and processes to ensure all the appropriate options are considered, developing and promoting techniques and strategies that optimise asset value.

RESPONSIBILITIES:
• Preparation and review of detailed drilling programmes and statutory permits for submission to the Drilling Manager
• Manage the Well Planning Process (WPP) as per the DMS including supervision of engineers to ensure compliance.
• Liaise with government and other agencies to ensure compliance.
• Analysis of drilling materials requirements to meet programme demands
• Manage preparation of cost estimates and AFEs for future wells and reconcile actual costs with approved AFEs
• Analysis and reporting of drilling performance and identification of areas for potential improvement or further study
• Research and promotion of innovative and best practice techniques to optimise drilling performance
• Co-ordination of service requirements for daily activities
• Ongoing assistance in the management of the performance improvement processes within MOH
• Maintenance and up-dating of design and construction documentation and statutory guidelines.
• Mentoring and supervision of Drilling Engineers

QUALIFICATIONS
• Degreed engineer
• > 8+ years drilling engineering experience with at least 3 years in GOM deepwater drilling
• Competence in deepwater well design and operating procedures
• Competence in permitting and compliance with MMS regulations
• Proven track record in adapting and using appropriate technologies
• Proven ability as a strong team player and team builder
• Willingness to assist the offshore teams at the well-site if required
• Motivated by global career opportunities with Maersk Oil & Gas

Apply now

Structural Engineer - Drilling rig structures

Structural Engineer - Drilling rig structures

Salary / Rate: US 900.00-1,200.00 ( insurances)
Location: Texas
Rate: Daily
Job Type: Contract
Sector: Civil & Structural

Job Description
- Ensure quality of Contractor's structural engineering deliverables developed during detailed design
- Ensure Company specifications (structural/weight control) are incorporated into the FEED specifications and drawings
- Steward Contractor preparation of procurement packages for structural components
- Respond to Contractor technical queries regarding structural and weight control
- Monitor and report on Contractor structural engineering progress
- Interface with Project team in Contractor's office on all aspects of the work (e.g., technical, execution, risk, permitting, etc.)
- Coordinate with specialist engineers on technical issues (e.g., weight control) and design reviews
- Update regarding status, achievements and issues

Experience/Expertise
- Candidates with experience in structural design, engineering, and engineering support during fabrication for drilling rigs.

Duration
1 year, Work will likely continue beyond the 1-year engineering effort to support fabrication work.

Apply now

Design Engineer - Offshore Drilling/SubSea

Design Engineer - Offshore Drilling/SubSea

Job Description:

This position includes a variety of tasks related to offshore/sub-sea pipeline systems from the concept phase through the operation phase.

Responsibilities also include:
business development, managing multi-disciplinary projects, qualification of new technology, risk assessment and integrity management services, structural analysis and design advisory services, verification and certification services, requalification and lifetime assessment, participation in research and development projects.

Apply now

Drilling Engineer

Drilling Engineer

Desired Expertise: Drilling Engineering
Experience: 5+ years
Education: Bachelors/3-5 yr Degree
Location: Houston, TX

ROLE:
* Supervise and participate in the provision of deepwater well design, planning, programming and reporting of drilling operations to ensure the technical and safety integrity of wells.
* Supervision of procedures and processes to ensure all the appropriate options are considered, developing and promoting techniques and strategies that optimise asset value.


RESPONSIBILITIES:
* Preparation and review of detailed drilling programmes and statutory permits for submission to the Drilling Manager
* Manage the Well Planning Process (WPP) as per the DMS including supervision of engineers to ensure compliance.
* Liaise with government and other agencies to ensure compliance.
* Analysis of drilling materials requirements to meet programme demands
* Manage preparation of cost estimates and AFEs for future wells and reconcile actual costs with approved AFEs
* Analysis and reporting of drilling performance and identification of areas for potential improvement or further study
* Research and promotion of innovative and best practice techniques to optimise drilling performance
* Co-ordination of service requirements for daily activities
* Ongoing assistance in the management of the performance improvement processes within Maersk Oil Houston
* Maintenance and up-dating of design and construction documentation and statutory guidelines.
* Mentoring and supervision of Drilling Engineers

QUALIFICATIONS:
* Degreed engineer
* 8+ years drilling engineering experience with at least 3 years in Gulf of Mexico deepwater drilling
* Competence in deepwater well design and operating procedures
* Competence in permitting and compliance with MMS regulations
* Proven track record in adapting and using appropriate technologies
* Proven ability as a strong team player and team builder
* Willingness to assist the offshore teams at the well-site if required
* Motivated by global career opportunities with Maersk Oil & Gas

Apply now

Drilling Engineer

Drilling Engineer

Skills: Drilling-Geothermal Well-Power Generation
Location:Santa Rosa, CA
Employ. Type:FULLTIME
Pay Rate: $80000-$105000 K/Yr
Job Length: Permanent
Travel Required: unspecified

Drilling Engineer with 5-10+ years of experience related to rig and field drilling operations. You will be part of a team that provides engineering services and support for all rig and contractor activities associated with geothermal well drilling programs.

You need a BS degree in Mechanical, Petroleum or Drilling Engineering or equivalent combination of education & experience.

You need experience designing & preparing procedures for new well completions, re-drills, and workovers. You will be expected to coordinate with other departments and sites to address company needs and issues. You need a thorough knowledge of drilling equipment and procedures including; Well Design, Well Servicing, Operational Risks, and Drilling Operations.
You need strong technical, operational, and planning abilities. You should have intermediate to advanced computer skills in word processing, spreadsheets, and database software.

You will be expected to establish and monitor benchmarks for quality of work.
You will be expected to maintain awareness of new drilling procedures and technologies and evaluates potential benefits.
You will be expected to assist in the development of drilling capital and expense budgets, including detailed justification.
You will also be expected to monitor actual costs incurred and compare to budgetary estimates.

Apply now

Marine Mechanic

Marine Mechanic
Job Category: Skilled Labor
Location: Peoria, IL
Position Type: Full-Time, Employee
Experience: 2-5 Years Experience

These positions will be responsible for the repair and maintenance of diesel marine engines, generators, potable water, compressors and other vessel systems. Positions require 90% travel Monday - Thurs- day with full benefits. One position will require knowledge of repairs to 3 cranes, hydraulic systems, and spud winches. Both positions require excellent knowledge in trouble shooting and diesel engine maintenance.

Apply now

Marine Engineer

Marine Engineer

Location: Slidell, LA
Employ.Type: FULLTIME
Pay Rate: $88000-$95000 K/Yr
Job Length: Permanent
Travel Required: unspecified

As Naval Architect you will oversee the design and development of structural scantilings and structural details of marine craft/vessels.

A BS Degree in Mechanical Engineering is required, however a Master's degree in mechanical engineering is preferred. Additionally you should have 6-8 years of experience in designing marine structural system that are related to either military and/or commercial ground combat vehicles.

You must be knowledgeable in the application of both high strength aluminum allloys and high strength composite materials as well as structural component design and stress analysis.Must be US Citizen. Excellent benefits and relocation package.

Apply now

Civil Engineering Manager

Civil Engineering Manager

This role will consist of the following responsibilities:

• Day to day management of projects
• Client Liaison
• Overseeing introduction of new systems and ideas within the Organisation
• Identifying areas for future business development
• Staff management, hiring etc
• Ensuring successful delivery of projects within timelines and budgets

To apply you will be a qualified Civil Engineer with experience of project management and staff management. Experience of working within the Gulf is desirable.
In return you will receive a TAX FREE salary between $60,000 -$80,000 USD per annum plus Benefits.
Benefits you will receive include free accommodation, flights, insurances, transportation allowance and full family benefits if applicable.
All applications via email only!

Apply now

Marine Field Engineer II

Marine Field Engineer II
Location: San Diego, CA
% Travel: 25

JOB DESCRIPTION:
Supports all aspects of remote field service operations including marine f/o cable installation, environmental sensor suite installation, LCE/Winch/A-Frame operations, launch & recovery of survey equipment. Must be able to receive general tasking and independently accomplish it while working together with a team of Field Engineers. Must be flexible to schedule changes and able to travel on short notice. Position requires candidate to live and work in close quarters for extended periods.

REQUIRED EDUCATION/SKILLS:
Possession of a Bachelor's degree from an accredited college/university or addition of 5 years to overall experience requirement. Minimum 3 years general marine engineering experience.

Apply now

Drilling Engineers-offshore oil and gas-Vietnam

Drilling Engineers-offshore oil and gas-Vietnam

Requirements

* B.Sc Petroleum Engineering or equivalent
* Must have certifications of drilling training courses, and be a member of an accredited Society of Petroleum Engineers (SPE)
* Experience working at the well site both onshore and offshore must be a minimum of 5 years as drilling engineer on jack up and semi submersible rigs
* Must be able to design general well drilling programs using geological data and detailed casing, drilling fluid, directional drilling, cementing, completion, well testing, well simulation, workover programs, which are designed by respective specialists
* Must be able to calculate drill string strength, casing strength, cement volume and displacement, calculate kill fluid volume and pumping parameters according to different methods, must have knowledge of drilling equipment and tools such as drill bits, liner hanger and running tools, casing running equipment, fishing tools, etc
* Must have certificates of safety and oil and gas well control training courses given by authorized international petroleum companies, schools or societies
* Familiarity with and respect of Vietnam law and regulations advantageous, and eligible to live and work in Vietnam
* Speak and write English Fluently

Responsibilities

* Assist drilling superintendent in management and supervision of drilling, completion, testing, simulation, and workover of oil and gas wells
* Temporarily relief drilling superintendent when he is absent from the office

On offer to the successful candidate will be an attractive salary package based in Vietnam.

Apply now

Senior Pipeline Engineer

Senior Pipeline Engineer

Requirements
B.S. or equivalent degree in Mechanical Engineering from an accredited university with minimum ten (10) years relevant experience in the oil/gas offshore industry.

Besides extensive expertise in offshore pipeline design & engineering, familiarity in pipeline materials application and stress engineering is essential. Must be fully knowledgeable about codes, standards & recommended practices for this discipline. Experience with Consultant, owner or Project Management Consultant organisation in the execution of similar projects is a must. Participation in projects in Middle East is beneficial.

Apply now

Chief Engineer - Offshore Newbuild

Chief Engineer - Offshore Newbuild
Job Location: Gulf Of Mexico

Job Description: Pride International is looking for a Chief Engineer to man the 4 drillships that are currently under construction in South Korea.

Qualifications: Dynamic Positioning and Azipod systems experience is preferred but not required.

5yrs+ Drillship is preferred but exceptional candidates with deep sea experience may be considered for the positions.

Must be a US citizen.

Compensation: $150-200k

Apply now

Lead Offshore Structural Engineer

Lead Offshore Structural Engineer

Remuneration
$70 to $90 per hour Extras: MEDICAL,DENTAL, SHORT TERM/LONG TERM DISABILITY, LIFE INSURANCE

Expiry Date: 16 July 2009
Location: USA

Description:
Lead Structural Engineer is required for an Offshore project. Offshore project experience is essential. Previous experience leading a team of engineers is also required. This is based in Houston on a long term contract position. Competitive rates and great benefits.

Skill
Structural

Qualification
HND or equivalent

Apply now

Mining Planning Engineer

Mining Planning Engineer

This is an excellent opportunity for a driven Mining Planning Engineer to step into a role with a top tier mining company in the Bowen Basin offering exceptional career training and development opportunities.

Just a few hours from the stunning Queensland coastline, you will be working a family friendly Monday-Friday roster. Reporting to the Technical Services Manager your main duties will include:

* Presenting conceptual designs to short term engineers and mine operations
* Producing a 5 year mine plan towards optimising the mine-site's long term objectives
* Providing strategic technical support
* Coordinating the operational design and safety of the mine
* Reporting and production forecasting

To be successful in this role you will be degree qualified and ideally be familiar with 3D Dig, Vulcan/Xpac software with previous experience in an open cut mining environment. You will have a minimum of 4 years experience in the Australian coal mining industry.

Salaries will be commensurate with experience and will be in the range of $110k - $135k + benefits. Salaries outside this range will be considered for people with exceptional skills.

Apply now

Senior Web Mining Engineer

Senior Web Mining Engineer
Company: Quest Group, Inc.
Type of Job: Full time,
Location: Palo Alto, CA 94301 US
Salary: Competitive

REQUIREMENTS
Functional Experience

Information Technology and Software Engineering;
Software Development and Programming; In software and programming: Design and development;
Years of experience in comparable position: 2 - 5 years
Data mining and analysis; Unix; SQL; open source Subversion SVN; ANT/NANT;

Industry Experience
Cross-functional experience: Information Technology

Management Experience
Number of employees managed: Individual Contributor;
Budget size: No budget responsibility;

COMPANY BENEFITS
Benefits
Retirement plan: 401k;
Stock compensation: None;
Insurance: Medical; Vision; Dental; Prescription Drug Plan; Life; Disability; Reimbursement Account;
Other benefits: None;

Apply now

Information Retrieval/Data Mining Engineer

Information Retrieval/Data Mining Engineer

Responsibilities

• We are seeking an exceptional software engineer with a proven track record in building large scale data mining, information retrieval, and data modeling systems. You must have experience leveraging machine learning and other IR techniques on very large scale data – both text and numerical – and have exceptionally strong software engineering skills to turn your research prototypes into maintainable, high-performance systems.
• Familiarity with Java, Ruby, or Python
• Database/SQL skills and familiarity with developing software on Linux

Education
B.S. or M.S. in Computer Science; Ph.D. a plus

Compensation
Salary/Equity/Benefits

Apply now

Mining Engineer

Mining Engineer
Job Location: Gillette, WY, US.
Position Type: Full-Time/Regular
Closing Date (HR Only): 07/12/2009

Responsible for supporting Engineering and Mine Operations projects and planning. Provide technical assistance for engineering and environmental projects including drafting, coal quality, surveying, and geologic modeling functions.

Required Skills :
* Minimum 1 to 3 years of engineering experience is preferred.
* B.S. in an Engineering Discipline. Mining, geological, or environmental engineering is preferred.
* Proficiency in the use of AutoCAD, SurvCADD, Trimble GPS surveying and business programs preferred.
* Proficient in mathematics and computerized programs (Excel, Word, etc).
* Ability to train in a variety of mining support classifications.

SPECIAL REQUIREMENTS:

* Job requires the ability to work outside during all weather conditions
* Ability to climb ladders and work off elevated platforms
* Lift up to 50 pounds
* Prioritize work in a self-directed manner.

Apply now